문자 보내
제품 소개전기 안전 시험 장비

IEC60335-1 Plug And Pins Residual Voltage Tester 10~199.9V

중국 Pego Electronics (Yi Chun) Company Limited 인증
중국 Pego Electronics (Yi Chun) Company Limited 인증
Je viens de recevoir les doigts d essais, Je suis très satisfait, c est très는 bien

—— ESTI 대형

친애하는 앨리스, 기계는 지금 잘 작동되고 있습니다. 당신의 지원 및 끈기가 당신을 우리의 문제를 해결하고 저희에게 교섭에 있는 아주 유용한 제안을 주도록 감사하십시오. 진짜로 좋은 협력.

—— TUV 라인지방 Pvt. 주식 회사

친애하는 Penny, 우리는 좋은 품질 amd 쉬운 가동으로 수년 동안 Pego 그룹에서 사기에 진짜로, 모든 제품 옵니다 평가합니다.

—— 제한되는 LIA 실험실

나는 봄 망치를, 그들 중대합니다 받았습니다!

—— BSH 그룹

그렇습니다 우리는 그(것)들 같이 조사 그리고 우리의 엔지니어를 얻었습니다. 감사합니다.

—— 감마 조명 Pty 주식 회사

봄 망치는 좋은과 일 벌금에 봅니다

—— 시그마 연결성

이것은 호평을 받습니다 계속 순서를 확인하기 위한 것이고 모두는 좋은 순서에 있습니다. 나는 당신의 아주 전문적인 업무를 당신을 감사하. 이것은 계속 유쾌한 거래입니다.

—— Gallagher 그룹

2019년 1월빠른배송 감사합니다.

—— 유진코퍼에 황동익입니다.

나는 당신이 우리가 교정 인증서와 2척 선박을 받는 것을 알게 하기 위해 이 이메일을 보내고 있습니다. 선박의 질을 위해 그리고 당신의 자선을 위해 당신에게 감사하고 싶습니다. 나는 다른 주제에 당신과 함께 일하는 것을 기다릴 수 없습니다.

—— 브란트 프랑스

우리는 그것이 매우 잘 작동하는 것을 확인할 수 있습니다! 좋은 품질의 장비에 대해 감사합니다.

—— PPC (그리스)

제가 지금 온라인 채팅 해요

IEC60335-1 Plug And Pins Residual Voltage Tester 10~199.9V

IEC60335-1 Plug And Pins Residual Voltage Tester 10~199.9V
IEC60335-1 Plug And Pins Residual Voltage Tester 10~199.9V

큰 이미지 :  IEC60335-1 Plug And Pins Residual Voltage Tester 10~199.9V

제품 상세 정보:
원래 장소: 중국
브랜드 이름: Pego Group
인증: Third-Lab Calibration Certificate
모델 번호: PG-SYDY
결제 및 배송 조건:
최소 주문 수량: 1개 세트
가격: USD3000~USD4000
포장 세부 사항: woodencase
배달 시간: 15 일로 일합니다
지불 조건: 전신환, 웨스턴 유니온, 머니그램
상세 제품 설명
표준: IEC60335-1, IEC60601-1 신청: 플러그를 위한 전압 잔류 시험법
시험 전압: 10~199.9V 시간을 시험하십시오: 분리된 것 뒤에 1s
작동 힘: 220v/50hz 보증: 12개월
하이 라이트:

IEC60335-1 Residual Voltage Tester

,

Plug And Pins Residual Voltage Tester

,

199.9V Electrical Voltage Tester

IEC60335-1 Plug and Pins Residual Voltage Tester for Household Appliances

 

1. Introduction

The residual voltage tester is designed according IEC60601-1:1988 clause 15 and IEC60335-1:2016 clause 22.5. The equipment has a high enough test impedance, it uses the method of simulating the disconnection of the plug to disconnect the appliance from the supply mains at the instant of voltage peak. It is used for the residual voltage test of electrical appliance like medical equipment and household appliances.

 

Working principle:

The appliance is supplied at rated voltage, any switch is then placed in the off position and the appliance is disconnected from the supply mains at the instant of voltage peak, 1s after disconnection, the voltage between the pins of the plug is measured with an instrument that does not appreciably affect the value to be measured, the voltage shall not exceed 34V as per IEC60335-1/60V as per IEC60601-1.

 

2. Features

1). The test is performed at the voltage peak to ensure the accuracy and consistency of the test data.

2). Test impedance is greater or equal to 1000MΩ, Meet the impedance requirements of the residual voltage and energy test between L-E poles and reachable capacitors.

3). The equipment can test: a. residual voltage between pins. b. residual voltage between each pin and enclosure. c. residual voltage of accessible parts and energy.

4). Auto hold on the max. test voltage, automatic alarm when the residual voltage exceeds 60/34V.

 

3. Parameters

Output voltage 0~250V/50Hz (AC)
Output current ≤10A
Output power ≤3KVA
Power supply time 1~99s (The equipment automatically judges that it is disconnected at the voltage peak for testing)
Test voltage 10~199.9V( resolution: 0.1V, accuracy: ±(reading*1%+1V))
Test time Test after disconnecting for 1 second
Number of tests 1~99 times
Test impedance 1000MΩ
Alarm range Settable (normally 34V or 60V)
Judgement Sound and light alarm, and cut off the voltage at the same time
Working power 220V/50Hz

연락처 세부 사항
Pego Electronics (Yi Chun) Company Limited

담당자: Ms. Penny Peng

전화 번호: +86-18979554054

팩스: 86--4008266163-29929

회사에 직접 문의 보내기 (0 / 3000)